PDA

View Full Version : V2 vs V1 - Dual LC-1 WB Analog Inputs



highperf
November 25th, 2006, 02:04 PM
Something I came accross while verifying my LC-1 Widebands.

The analog input coupler on V1 had a single shared ground (3 wires 1 ground). I noticed when I got V2 the couplers had 2 wires each (positive and ground).

I jumped the ground just before the coupler to basically share it again and I found that the voltage on the second input appeared to stay at zero.

Easy fix to just connect LC-1 ground and both work great. it doesn't seem logical but I am interested to see if anyone has seen this.

I also noticed that the Orientation of the little sticker on the back of the V2 unit is a little strange until you drink 4 shots of Vodka. Then it clears right up:muahaha:

V2 :rockon:

Jim

joecar
November 27th, 2006, 06:09 AM
Hmmm... V2 should be shipped with a bottle of Smirnoff... :D

highperf
November 27th, 2006, 12:28 PM
Actually GreyGoose and a bottle is "Standard Issue" whenever grounding an LC-1. :D:cheers:


Anyway my dual LC-1's are now working "dandy" on my V2 :)