PDA

View Full Version : one or more incorrect segment checksums?



dbaxter_ss
April 19th, 2005, 02:48 PM
I just got the new fuel rail fix and superchips tuner (tune) from magnuson for my GTO.

After flashing it with the superchips tuner, I pulled it immediately off to see what was done and make appropriate changes.

But once it was done pulling the tune, and each time opening I get a popup.

The calibration file c:\blah\file.tun contains one or more incorrect segment checksums.

EFILive cannot guarentee the integrity of the file and will not allow this file to be reflashed into a PCM.

copy of file \/
http://www.purplegto.com/files/Magnuson%20NEW%20with%20Fuel%20Rail%20Fix_0000.tun

GMPX
April 20th, 2005, 12:24 AM
I just got the new fuel rail fix and superchips tuner (tune) from magnuson for my GTO.

After flashing it with the superchips tuner, I pulled it immediately off to see what was done and make appropriate changes.

But once it was done pulling the tune, and each time opening I get a popup.

The calibration file c:\blah\file.tun contains one or more incorrect segment checksums.

EFILive cannot guarentee the integrity of the file and will not allow this file to be reflashed into a PCM.

copy of file \/
http://www.purplegto.com/files/Magnuson%20NEW%20with%20Fuel%20Rail%20Fix_0000.tun

Quite common with some aftermarket companies, not real good though, VERY bad on an ETC car.

I'll take a look at the file for you (except the link isn't working).

Cheers,
Ross

dbaxter_ss
April 20th, 2005, 03:33 AM
Sorry about that, antivirus was blocking :D

http://www.purplegto.com/files/maggie_0000.png

just right click, save as and rename at .tun

I am going out this afternoon for lunch and trying again, sure hope this is not a version thing also? z06 speed limiter issue in tuning section also acting weird