force motor current

[69camaro5speed]

looking for way to play back log file over force motor current any one ever done the i try logging differant things like trans temp and delivered torque sure would be handy know there its getting trans pressure from

[joecar]

You create a chart and specify TFMPRS as the pid using either psi or kPa; you would normally do this on the Dash tab "B".

Or you can create a dash gauge for this on Dash tab "A".

To play it back, you press the Play button, or you step using the right cursor key (with SHIFT goes more frames per key);

or you just view the chart (can zoom in or out);

Is this what you're asking...?

[69camaro5speed]

i know how to do that normaly say if you log map if you open up the log and tune file when you move the map log and open up the ve table it traces across it as you move the map log shows you where you are on the ve thats what i am trying to do