MAX Enrichment?

[dbaxter_ss]

Quick question on this.
If is is set to 13? And the PE Modifier Based on RPM is set as below will it go below the 13:1?

Just wonders since going to the dyno yesterday it looked great at ~12:1 but thats not what its set at.
after attempting to change this to 10.75 it actually went lean not rich.

My question that I am pretty sure about. Since the tuner( I didn't do this) left the Max to 13, and as you can see below is set to go richer. IS IT ignoring those or using a default or other table since they are set out of range of the max?



I worked on a z06 that the max was set to 20 and i was able to modify the PE vs RPM all day and the a/f was exactly what I set it.

LABELS PE Modifier Based on RPM
RPM Value
0 13.010199
400 13.010199
800 13.010199
1200 13.010199
1600 13.010199
2000 13.010199
2400 12.564942
2800 12.051882
3200 12.051882
3600 12.051882
4000 12.051882
4400 11.499465
4800 11.499465
5200 11.499465
5600 11.003509
6000 11.003509
6400 11.003509
6800 11.003509
7200 11.003509

[GMPX]

Quick question on this.
If is is set to 13? And the PE Modifier Based on RPM is set as below will it go below the 13:1?

Do you mean parameter B3606?.
That is used when the PCM decides the engine is running too hot.

Cheers,
Ross