NE1 Know How to Check WB02 Sensor?

[Chalky]

My PLX M250 died, the short/quick answer from PLX. I am wondering if it could be a bad sensor. The sensor I use is installed as needed and then removed. I can't help but believe that the sensor removal/install may have damaged the sensor.

I would love to track this down before sending unit back to PLX. With only a 90 warranty, all repairs are now out of pocket.

With no guage, I am not sure how to test WB!

[Chalky]

All OK Again !!

[joecar]

Chalky, you got it working... what was wrong with it (I'm not familiar with PLX devices)...?

[Chalky]

Joecar:

Ultimately, I had two issues with my PLX. I did not have the original wiring diagram and I also had a bad power supply.

I assumed my lighter was working. Wrong (Never assume)
I had it wired wrong.

Luckliy for me, Bruce Melton had a copy of the wire schematic and emailed it to me.

I probably need to use it more than twice a year to stay familiar.

I like to think of this as an entitiled senior moment!!

[joecar]

Ah, Murphy's Law and it's various colloraries in action... happens to me all the time.