y2kws6
December 19th, 2006, 09:31 AM
I must be doing something wrong but I cant get both of my calculated pids to work. I have the wideband working but I cant get the fuel pressure pid to show up. Here is my code any help is greatly appreciated.
# ================================================== ============================
# File details
# ------------
#
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ================================================== ============================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
AFR None AFR "Air Fuel Ratio"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-001
AFR 10.0 18.0 .1 {EXT.AD1}*1.6+10
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System Description
#------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------
CALC.AFR_WBC F001 CLC-00-001 AFR Fuel "Wide Band AFR"
# ================================================== ============================
# File details
# ------------
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ================================================== ============================
# Units
# -------------------
*UNITS
#Code System Abbr Description
#-------- ---------- -------- --------------------------------------------------
psi Imperial PSI "Pounds Per Square Inch"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- ---------------------------------
*CLC-00-002
psi 0.00 100.00 .2 "({EXT.AD2}*25)-12.5"
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
#Code PRN SLOT Units System Description
#------------- ---- ------------ ------------ ------------ ---------------------
CALC.FP F002 CLC-00-002 psi Fuel "Fuel Pressure"
The pid doesnt show up in the list of pids. I'm sure that there is something I'm missing I'm just not sure what it is.
Thanks
Tom
# ================================================== ============================
# File details
# ------------
#
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ================================================== ============================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
AFR None AFR "Air Fuel Ratio"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
*CLC-00-001
AFR 10.0 18.0 .1 {EXT.AD1}*1.6+10
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System Description
#------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------
CALC.AFR_WBC F001 CLC-00-001 AFR Fuel "Wide Band AFR"
# ================================================== ============================
# File details
# ------------
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ================================================== ============================
# Units
# -------------------
*UNITS
#Code System Abbr Description
#-------- ---------- -------- --------------------------------------------------
psi Imperial PSI "Pounds Per Square Inch"
# ================================================== ============================
# Add slot definitions here
# --------------------------------
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- ---------------------------------
*CLC-00-002
psi 0.00 100.00 .2 "({EXT.AD2}*25)-12.5"
# ================================================== ============================
*PRN - Parameter Reference Numbers
# --------------------------------
#Code PRN SLOT Units System Description
#------------- ---- ------------ ------------ ------------ ---------------------
CALC.FP F002 CLC-00-002 psi Fuel "Fuel Pressure"
The pid doesnt show up in the list of pids. I'm sure that there is something I'm missing I'm just not sure what it is.
Thanks
Tom