how to build map to log boost?

[minytrker]

how do i need to build a map to log boost?

[Tordne]

Are you wanting to make a Map for the Boost VE Table?

[minytrker]

I have to make some small changes to a supercharged car. It has the tune that came with hte super charger kit. The owner claims it makes 7lbs of boost. I just want to make a map to log boost to check how much boost it is really making. Also intrested in how to auto ve a boosted car.

[Tordne]

AutoVE will be similar except you will likely be using Custom OS boost tables? Or is it using stock OS still? 2 bar MAP sensor?

What data do you want to reference the boost pressure to (i.e. RPM, MAP etc)? These will form the row and column axis that you want.

[VT LS1 NZ]

I have to make some small changes to a supercharged car. It has the tune that came with hte super charger kit. The owner claims it makes 7lbs of boost. I just want to make a map to log boost to check how much boost it is really making. Also intrested in how to auto ve a boosted car.

Here's one I used:

# ================================================== ============================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------

*CLC-00-992
PSI 0.0 20.0 .2 "(({SAE.MAP}>102)*({SAE.MAP}-102))*0.145"