My first EFI Panel w Custom OS toggle

[Beer99C5]

Going to have this cut Thursday for my car. Although the .jpg lost a bit in resolution, the finished plate should come out great :cheers:

http://www.retrorelics.net/jim/Boards/EFILive/EFIPanel.jpg

The gauges switch is so the wife does not have to look at the WB and Nitrous Pressure gauges when she is driving around, The EFI toggle will reflect the NA tune and then be able to enable the custom tune :D

[Black02SS]

Once again, very nice looking panel. :cheers:

[TAQuickness]

Great work Beer!

[Beer99C5]

http://www.retrorelics.net/jim/Boards/Corvette/Panels/BeerPanel1206.JPG

Not sure I like the Big ass momentaries...although they will work very well with my Fat Fingers :muahaha:

The small Text came out good to, although the photo does not really show how crisp the letters are that small :)

Edit:
Changed up the switches to smaller ones
http://www.retrorelics.net/jim/Boards/Corvette/Panels/BeerPanel1206B.JPG

[Bruce Melton]

Nice work!
That funny gas is a bit involved to administer?

[TAQuickness]

That looks really good Beer. I need to make some time to get one going for the bird.

[Doc]

Do you mind letting us know what kind of material you used? The lettering turned out real nice too, mind sharing that too?

[Tordne]

These panels look seriously cool mate!!! I just wish I had something to toggle, turn on/off etc so I could have one. You'd have to make one special for a Holden though :bash:

[joecar]

Beer, looks great, :cheers:

I think the bigger buttons look better.

[Beer99C5]

Do you mind letting us know what kind of material you used? The lettering turned out real nice too, mind sharing that too?

Done with Laserable laminate on a laser engraver.

Here are some other ones I have done for various forum members (mostly LS1tech)

LC-1 F-Body panel
http://www.retrorelics.net/jim/Boards/Corvette/Panels/LC1panelF_body.JPG

Corvette Dynotune Pressure guage w/ nitrous
http://www.retrorelics.net/jim/Boards/Corvette/Panels/GaugeThreeswitchinconsole.JPG

http://www.retrorelics.net/jim/Boards/Corvette/Panels/OutlawMSF1.JPG

http://www.retrorelics.net/jim/Boards/Corvette/Panels/gr8one99SS_2StageFBodyB.JPG

http://www.retrorelics.net/jim/Boards/Corvette/Panels/Blu2000SSF1.JPG

[PladdPezzPunk]

that looks very cool nice job

[joecar]

Professional looking, very good. :cheers:

[warscout2]

very clean do you sell them how much for a custom one for an 2000 firebird

[Beer99C5]

Without switches they are $30, whatever logo and whatever switch holes and text needed. Generally I charge $5 a rocker or momentary and $15 for each.

I work offshore so I can only cut them when I home. Let me know what you need via PM or email.

Beer

[Fratsit]

Beer,

Sent you a PM. :)

R/

Jeff