V2 input/output pin out [Archive]

horsepower

January 2nd, 2007, 03:23 AM

I can't seem to find the 'photo' showing which pins are what on the input/outputs of the V2 - can someone please post this again, or point me to it!

horsepower1

January 2nd, 2007, 03:29 AM

found it - never mind

Tordne

January 2nd, 2007, 05:31 AM

You turned the device over right ;)

horsepower1

January 2nd, 2007, 07:05 AM

hmm, I did - but nothing is there?

I have an early beta unit, maybe it wasn't on those? What am I missing?

Tordne

January 2nd, 2007, 08:44 AM

If you were in the Beta program that could be the case, and you will get a new soon. Otherwise there should be stickers on the bottom of the V2 that indicate the ED inputs etc and the ground and signal pins.

JezzaB

January 2nd, 2007, 12:16 PM

If you were in the Beta program that could be the case, and you will get a new soon. Otherwise there should be stickers on the bottom of the V2 that indicate the ED inputs etc and the ground and signal pins.

I did this a few days ago when I got my WBO2. Searching everywhere for it and turned it over and slapped my head. Sheeeez..

Jez