PDA

View Full Version : Impedance of Analog Inputs on V2



CGTMS
January 18th, 2007, 01:23 PM
Hello,

What is the specification on the impedance level on the analog inputs? If I wanted to share a voltage from an existing sensor with the ECU and Flashscan V2, would I expect to see any loading issues?

Thanks....

2002_z28_six_speed
January 21st, 2007, 08:09 PM
I would suspect that if it is voltage-in it would have a really high resistance in order to measure the voltage coming in. Wondering something similar myself when thinking about sharing WB and simulated NB inputs with a single WB in factory location.