PDA

View Full Version : Turning off Knock sensor?


SinCity-Z
January 21st, 2007, 07:19 AM
Help! What is the proper way to disable the knock sensors. I did an LS6 to LS2 conversion. I did not install the knock sensors and will not be able to install them for a few more months. Also how does this affect the low and high timing maps?

Thanks

Monty
SinCity-Z
January 25th, 2007, 02:35 PM
Wow, No One has an answer to this? :Eyecrazy:

Monty
jfpilla
January 25th, 2007, 02:57 PM
Wow, No One has an answer to this? :Eyecrazy:

Monty

I imagine they do. I'll take a guess.
In:
C6001 P0325 and 327 select "X not reported".
C6002 Po325 and 327 select "No Mil".
SinCity-Z
January 27th, 2007, 04:28 PM
jfpilla,
Thanks! I'll try it and see how it works.


Monty
joecar
January 27th, 2007, 05:24 PM
Maybe also P0332 in those tables.
Tordne
January 27th, 2007, 05:32 PM
Not sure that will turn them *OFF*. I tied to do this same process with my front O2's to see if it would let me command 1.00 EQ in COS3/5 and not enter Semi-Open Loop. The STFT data was still active, so they were not *OFF* :eek:
jfpilla
January 28th, 2007, 04:17 AM
It would seem that the difference between 02's and knock sensors is that they either report or not report. My first thought was to suggest to just not connect them and nothing bad would happen. But, why not turn off the possibility of codes also?
jfpilla
January 28th, 2007, 05:26 AM
Maybe also P0332 in those tables.

Yes, why not? Missed it. Wonder why there's no circuit bank 2 selection?
joecar
January 28th, 2007, 08:05 AM
Yes, why not? Missed it. Wonder why there's no circuit bank 2 selection?Oh...? Shows up on F-body cal.
jfpilla
January 28th, 2007, 08:22 AM
See P0325. Should C5's have bank 2?
joecar
January 28th, 2007, 08:49 AM
Oh... (...hit me now :bash:...)... I was wrong, I see no "circuit bank 2"... I see exactly what you show in your image.

That is puzzling... what does the GM service manual say (I'm digging thru that in a minute...)

You would expect 4 DTC's rather than 3.
More coffee... :cheers:
jfpilla
February 13th, 2007, 01:52 PM
See P0325. Should C5's have bank 2?

Anyone, Paul, know the answer?

Sincity, did it work?