PDA

View Full Version : 4.3 cal. files?



JODAGR
January 23rd, 2007, 08:37 AM
I have the new 555 build software and I downloaded the extra cal. files and I still cant get a copy of the tune ,It keeps on bringing up an error code. Any help would be appreciated .By the way its a 2000 1500 Silverado
:Eyecrazy:

Tordne
January 23rd, 2007, 09:02 AM
When you do a read of the PCM what is the OS # shown?

JODAGR
January 23rd, 2007, 09:06 AM
Yes it is OS # 16265175.

Tordne
January 23rd, 2007, 09:15 AM
A calibration has not been released for that yet. Can you forward the tune file to support at efilive dot com. We can then look to add support for it (if it isn't already done).

JODAGR
January 24th, 2007, 01:44 AM
A calibration has not been released for that yet. Can you forward the tune file to support at efilive dot com. We can then look to add support for it (if it isn't already done).

Ok I sent it over thanks for the help.By the way there is a calibration file with the same number ,it might already be done?

Tordne
January 24th, 2007, 06:25 AM
I have just forwarded the file on. It may be an OS that we haven't seen before in which case it will need a cal made for it. It may already be done but not shipped. We'll see soon :)

wait4me
January 25th, 2007, 05:21 AM
all the vortech cals are supported. You must not have put the zipped files into the correct folder. You need to move the contents of the zipped folder to c:\\Program Files\EFILive\V7\Calibrations

The files can not be zipped when in that folder so make sure it is just the seperate files you put in to the calibrations folder. 16265175.cal is an example of the file name that needs to be in there.