Error

[ASSAMI]

Last week I was TUNING 2002 Camaro. Everything went fine .

Today he came in asking me to adjust the shifting points for him .
I hope that the car up made the adjustment needed and tried to upload the program .

It is not happening I can't upload anything . It asked me to make a full flash , and one I tried to do so it takes me out saying I am not allowed .

Could this guy have changed his PCM ??

If so how can I tell ? Wouldn't EFI ask me for new license ?

I tried uploading on another vehicle and everything seems fine .


If I press OK it will ask me to reflash without the high speed . I did " it is giving me the same message "

Also , I have reflash the PCM with the latest GM software using the Tech2.

Same thing …. Same message

[ASSAMI]

Also sometimes this error pops up on my screen .
I have downloaded the program to another PC and it gave me the same exact error !!!

The specific error came only with a new 7.3.3

[Tordne]

There was an error where the serial number got changed to all 000's.

Download the latest software version from the EFILive Downloads page. It will require a license to resolve, but we'll of course provide you with a replacement.

To get the replacement send:
- Your FlashScan Serial number
- The new PCM ID that gets assigned to the PCM

Send to support at efilive dot com.

[ASSAMI]

i do have the the new V 7.3.3

i just tuned a different car!! why only this !!!

[Tordne]

Build of Tune Tool should be 555.

Perhaps that car was tuned with the problem version?

Try:
- Connecting your V1 or V2 to your PC
- Open the Tune Tool and go to the Help menu and choose the licensing option for the appropriate FlashScan version
- Check if there is a PCM ID listed as 000000000000

If it is not listed, query the PCM info as well and see if it reports the PCM ID as 000000000000

[ASSAMI]

its, 000000000000

[Tordne]

I've replied to your email. Also check this thread for more info: http://forum.efilive.com/showthread.php?t=4093