charge temp blending

[5.7ute]

I was having a look at the B4901 table charge temperature blending to see what changes are made at highway speeds compared to normal road speeds. The link is stated as GM.dynclair dma however this pid has no effect on the table. It will only highlight the first row on the table.
at 175kph 6500 rpm I am getting a reading of 0.84 grams per cylinder where the table goes from 0.00 to 150.0 grams per cylinder in 10 gram increments. Am I logging the wrong pid here or is there something on the table settings I have to change to get it to work?

[Tordne]

I think it should actually just be GM.DYNAIR - that is a setting in the cal_link.txt file which will need to be corrected in the software.

[5.7ute]

I have added gm.dynair to the cal_link text file & have done another log with the gm dynair pid. It is still not linking with the B4901 table.

[5.7ute]

Found answer in the general section. Thanks for the help Andrew.