BlownAlaskan
May 3rd, 2005, 06:08 PM
Hello All, this is my first post here. FlashScan is a great product!!
When I go WOT, my afr seems stuck between 10 and 10.5:1. I've ran my pe/rpm table almost to 0 with seemingly no change. My trims are neg at idle and go zero like they should at WOT. My IFR is .7027 across the board, and my maf and ve tables are stock. COT has also been disabled. Any ideas?
Ben
When I go WOT, my afr seems stuck between 10 and 10.5:1. I've ran my pe/rpm table almost to 0 with seemingly no change. My trims are neg at idle and go zero like they should at WOT. My IFR is .7027 across the board, and my maf and ve tables are stock. COT has also been disabled. Any ideas?
Ben