PDA

View Full Version : Boost pressure input and logging



diynoob
March 3rd, 2007, 04:38 PM
How is everyone logging boost pressure? I am running 13-14psi at the moment on the OEM OS in my Z06 and I don't have a 2 or 3 bar sensor anywhere on the car. Since it's a turbo app, I need to log boost throughout the RPM range instead of just looking at peak boost.

:cheers:

Edit, also, since I am running 13-14psi and may even go as high as 15psi, I am assuming a 3 bar is probably the right path to go, especially if I want to be able to detect any sort of top end boost creep. I've used the sensor on this order page before with their controller/data logger and it seemed to work well and has a big pressure range, but it's a bit pricey. http://www.zeitronix.com/order/order.htm Any ideas are welcome :)

TAQuickness
March 4th, 2007, 01:08 AM
From the scan or tune tool, click Help -> Tutorials -> Custom OS Tutorial. There is a section in there about setting up 2-3 bar map sensors.