PDA

View Full Version : Is an '06 SSR supported ?


Boost
March 19th, 2007, 04:07 AM
Oh please please please tell me that I can adjust the speedo for 4.56 gears with a 2006 LS2 SSR!
ScarabEpic22
March 19th, 2007, 11:33 AM
Should be able to, as long as its the E40 ECM. As you know, E38 is coming soon.
Boost
March 19th, 2007, 12:05 PM
I was able to read and tune the ECM, my concern is mainly about the gearing adjustment, and I think my question was answered in this thread:

http://forum.efilive.com/showthread.php?t=4778

However, I would like to know if there is ANYTHING at all I can do until the new release to prevent the SSR's speedo from pegging and accumulating excessive mileage on the odometer. Also the ABS light is illuminated, making the vehicle unsafe to drive. (all due to the 4.56 final drive)

Thank you!
ScarabEpic22
March 19th, 2007, 02:13 PM
If the ABS light comes on, it could be partially related to the TrailBlazer EXT having the same problem. There are guys that are tuned and cant get over the speed limiter as the ABS system is limiting them to the stock 100-ish. Westers has a fix (no idea what) for it, and the other 2 limiters that all TBs have (rev and VSS).
slowhawk
March 20th, 2007, 10:31 AM
Oh please please please tell me that I can adjust the speedo for 4.56 gears with a 2006 LS2 SSR!

Good luck on the speedo;) We have an 05 SSR with 4.56 gears and we can't get the speedo right yet.I know the guy's at EFI live are working on it,so hopefully a few weeks.
ScarabEpic22
March 20th, 2007, 10:51 AM
Good luck on the speedo;) We have an 05 SSR with 4.56 gears and we can't get the speedo right yet.I know the guy's at EFI live are working on it,so hopefully a few weeks.

Well, yesterday Paul (or Ross) said later this week a new version of the software is coming out with a tire calculator for a bunch more engine/trans (aka Duramax, 4.2L I6 LL8, and the LS2s), so you should be able to correct it here in about a week if all goes according to plan.
Boost
March 21st, 2007, 10:38 PM
When is it coming out?
GMPX
March 22nd, 2007, 12:14 AM
Was supposed to be yesterday :frown: , I'm pretty sure Paul is just putting the finishing touches to everything.

Cheers,
Ross
Boost
March 22nd, 2007, 01:02 AM
Thank you very much, I don't mean to rush you I understand that it must take a lot of work to improve on an already outstanding product. I just have a customer that is waiting.
ScarabEpic22
March 22nd, 2007, 08:51 AM
Cool, I was wondering when as well. Now I dont have to ask!:)
Boost
March 25th, 2007, 10:42 PM
Any news? When is it going to be ready?
Boost
April 9th, 2007, 11:14 AM
I am having problems with this :

http://forum.efilive.com/showthread.php?p=45223#post45223