PDA

View Full Version : BB Logging keeps shutting off after a few seconds



dbaxter_ss
May 7th, 2005, 12:17 PM
Not sure whats happening. I just started to use this the other day and maybe I am doing something wrong.

I can plug in my laptop and scan without interuption going to work and coming home. But now when attempting to bb log, it starts and the logging light turns green, logs stays one for a few seconds and shuts down.

I ran through the memory check and it all came back clean.

Any suggestions?? So far they all seem to be about 24k? Is this a setting?

jsttry
May 7th, 2005, 12:58 PM
When you configure the BB logging (Flashscan --> Program selected PIDs into Flashscan) there is an option to set how many frames to log. By default this is 600 which is only about 1.5 minutes. Change the frames to 0 to allow continuous logging.

dbaxter_ss
May 8th, 2005, 03:19 AM
When you configure the BB logging (Flashscan --> Program selected PIDs into Flashscan) there is an option to set how many frames to log. By default this is 600 which is only about 1.5 minutes. Change the frames to 0 to allow continuous logging.

I knew it was a user error :D

Thank You