PDA

View Full Version : boost a/f



Cablebandit
April 9th, 2007, 07:31 AM
Ok so i am cos5..3bar. Under boost it says its commanding 8.5-9 afr...where is this command coming from? my pe is set to all 11.7

onfire
April 9th, 2007, 09:19 AM
b3647

Cablebandit
April 9th, 2007, 10:34 AM
hmmm it says 11.5 in the 100kpa row.....anywhere else

onfire
April 9th, 2007, 01:52 PM
hmmm it says 11.5 in the 100kpa row.....anywhere else


Check the ECT modifier. Should be 1.0 65C and up.

Post a log.

Cablebandit
April 9th, 2007, 02:08 PM
emailed to ya tom THANKS!!

Cablebandit
April 9th, 2007, 02:16 PM
a0008 is 1.0

Cablebandit
April 9th, 2007, 02:19 PM
think i found it...3618 has some RICH SETTINGS that seem to correspond to what i am seeing...yours is 11.7 Tom so i will change that. Does look to be the prob.