lplott
April 19th, 2007, 03:20 AM
Okay, I have had a lot of folks try and help me with this deceleration surging problem, and I am ready to start over and start from scratch. Please let me know if I have this in the right order or have forgotten anything:
1. Load stock 2002 tune file into PCM.
2. Follow the tutorial “Installing an EFILive Custom Operating System & Using the 2/3 bar Features of EFILive V7” to set all the basic setting in the OS for a boosted system.
3. Load injector scaling for my injectors.
4. Cut/Paste MainVE (B0101) and BoostVE(A0009) tables from most current tune into this new beginning.
I also read a post the DFCO should be turned off during AutoVE then turned back on after AutoVE, how is this accomplished, data not in tutorial?
After doing the above, I should be able to start AutoVE tuning again and if the surging return, I have a known starting point to begin troubleshooting.
1. Load stock 2002 tune file into PCM.
2. Follow the tutorial “Installing an EFILive Custom Operating System & Using the 2/3 bar Features of EFILive V7” to set all the basic setting in the OS for a boosted system.
3. Load injector scaling for my injectors.
4. Cut/Paste MainVE (B0101) and BoostVE(A0009) tables from most current tune into this new beginning.
I also read a post the DFCO should be turned off during AutoVE then turned back on after AutoVE, how is this accomplished, data not in tutorial?
After doing the above, I should be able to start AutoVE tuning again and if the surging return, I have a known starting point to begin troubleshooting.