PDA

View Full Version : Starting Over



lplott
April 19th, 2007, 03:20 AM
Okay, I have had a lot of folks try and help me with this deceleration surging problem, and I am ready to start over and start from scratch. Please let me know if I have this in the right order or have forgotten anything:

1. Load stock 2002 tune file into PCM.
2. Follow the tutorial “Installing an EFILive Custom Operating System & Using the 2/3 bar Features of EFILive V7” to set all the basic setting in the OS for a boosted system.
3. Load injector scaling for my injectors.
4. Cut/Paste MainVE (B0101) and BoostVE(A0009) tables from most current tune into this new beginning.

I also read a post the DFCO should be turned off during AutoVE then turned back on after AutoVE, how is this accomplished, data not in tutorial?

After doing the above, I should be able to start AutoVE tuning again and if the surging return, I have a known starting point to begin troubleshooting.

lplott
April 19th, 2007, 03:35 AM
Probably should cut/paste a current {B3647} into the basic tune also.

Lonnie

lplott
April 19th, 2007, 03:36 AM
Got the answer to the DFCO part, just need a "normal" temp to put back in {B3313} after AutoVE.

Lonnie