Problem with commanded AFR in OS5

[Jason S.]

I am having an issue with commanded afr in OS5 it would appear. I am getting values logged that I don't have in the commanded open loop table. I'll attach a log as well as the cal...maybe I'm missing something but I don't think so. At Idle it showing commanded afr of 10.29.... Any help is greatly appreciated!

Thanks

Jason.

[Tordne]

I'm sending you a PM.

[Jason S.]

I definately am missing something, becuase according to efilive, B3647 isn't available in the OS5 (when I do a search for that table). I set B3605 as stated in the auto ve tutorial. B3607 is a single entry value, I had this at 0 (which is where it was from the factory). I guess I'll put that at 11.5 but I can't see how that is the issue.

Any ideas? Did I do the update incorrectly?

Thanks for the help.

Jason.

[GMPX]

If you are using 02020005 then there was a .cal file that did have a table labeled wrong. Use the attached one instead.

Cheers,
Ross

[joecar]

Ross,

Is that cal file newer than the one in build 515_644_622_55 (April 20 release)...?

Joe

[Tordne]

I'm pretty sure the 7.4.2 release has all the updates rolled in to it.

[Doc]

Can you post up a full list of your mods?