Adding logs together?

[hquick]

I searched but couldn't find anything?
Today I ran a long log and 'ran out of frames?' half way.
I pulled over, kept the truck running, extended the No. of frames allowed to 100 (x1000) instead of the 50 and started logging again.
Is it possible to add those two logs together?

[kbracing96]

Not right now. Paul said we will be able to with the V8 version of the software when it get done, I believe.

[hquick]

Thanks KB

[dc_justin]

Thanks KB

If you're a programmer, the Flashscan API will allow for you to do this. I recall a few people discussing doing this quite a while back.

Justin

[SSpdDmon]

I know I made a quick spreadsheet in excel in the past for adding MAF logs or VE logs together. You just need to create some weighted averages to add them together.

Example....

Log 1 -
BEN for 50kPa at 1200rpm: 1.01
Cell count 504

Log 2 -
BEN for 50kPa at 1200rpm: 1.025
Cell count 146

Total cell counts for that data point: 650

Equation: (1.01*(504/650))+(1.025*(146/650))=1.01337

A little copy/paste of the equation to the right cells and that's it.

[hquick]

Thanks....I might give it a try later. That's handy to know.

[ryans1000]

Could be nice to join multiple logs when doing an autove tuning and you dont have the time to do on long log but rather several throughout a day or two.