View Full Version : went to the dyno look at my log
warscout2
May 17th, 2007, 04:32 PM
if you guys would take a look at my log and give me any tips or help?
i was a bit sad about my low numbers 304 hp /303 tq
this is the first time i put it on the dyno and would like to now fully tune my car for power.
car has long tube headers off road y pipe stock catback, lid, and it has the 2002 os on a 2000 car
JezzaB
May 17th, 2007, 05:55 PM
if you guys would take a look at my log and give me any tips or help?
i was a bit sad about my low numbers 304 hp /303 tq
this is the first time i put it on the dyno and would like to now fully tune my car for power.
car has long tube headers off road y pipe stock catback, lid, and it has the 2002 os on a 2000 car
Next time select a max of 24 channels mate and it will make it 10fps and update faster.
Good luck with it,
Jez
SSpdDmon
May 18th, 2007, 04:03 AM
Did you use the '02 timing tables or the '00 timing tables. It looks like the timing is low - like you used the '02 tables, which are too low for '00.
warscout2
May 18th, 2007, 08:09 AM
I think i might have used the 02 timing tables i downloaded it from holdencrazy i think it was this one im not sure http://www.holdencrazy.com/EFILive/TuneFileRepository/Modified/Chevrolet/00000019.tun that is a stock 99 migrated to 2002
When i get home i will download my tune right now
then upload that and my stock tune.
warscout2
May 18th, 2007, 03:22 PM
ok so i went home and the first tune is the one im running and the secound one is my tune from when the car was stock.
i dont think i brought over the charts from my tune when i switched can everyone take a look and see what you think?
also does it look like i could have hurt anything running the new tune?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.