PDA

View Full Version : pcm licenced



lsxtech
May 23rd, 2007, 08:42 AM
My pcm is already licenced and has been working fine, I changed my gears and went to adjust for that and it want let me flash, 1st in said i needed a full reflash so i did that and now it says i need to licence the pcm, I'm running os5 with a v1, also when i read the pcm it doesn't show a vin, my battery went dead today, any help would be appreciated, thanks jason

Biggsy
May 23rd, 2007, 09:49 AM
Are you running the latest version of EFILIVE?
Can you read the PCM still with the cable?
There was an issue with the PCM serial number getting changed to 000000000 in a previous version of EFILIVE.
If that has happened, PM Blacky, Tordne or GMPX and they can help.

Cheers,

joecar
May 23rd, 2007, 11:04 AM
lsxtech, welcome to the forum... :cheers:

Some questions:
a. you had previously flashed ok, is this correct...?
b. were you already running COS5 or were trying to flash it in...?
c. were you using the latest software from here: http://www.efilive.com/download.aspx...?
d. was it your car battery or laptop battery that died...?
e. did the battery die during flashing...?
f. did you get your battery fixed...?

Cheers
Joe
:)

lsxtech
May 23rd, 2007, 12:28 PM
a. flashed ok before
b. yes already had os5 running for 3 weeks
c.I have downloaded 7.4 but haven't installed running 7.3
d. car battery went dead while on the lift i think something was on inside, I recharged the battery for a few, but i then jumped it off
e. no battery didn't die while flashing
f. battery working fine now

I used another licence and got it to flash but i still have vin #00000000000 and when i go to scan it says 0000000 for the vin also,
It will read the pcm, still says 000000000 vin, so i tried a full reflash and then reread pcm still says 000000000 and everytime i reflash i have to do a crank relearn, thanks jason

joecar
May 23rd, 2007, 12:35 PM
Jason, I pm'd Paul about this.

lsxtech
May 23rd, 2007, 12:42 PM
thanks , joe

Blacky
May 23rd, 2007, 04:46 PM
I used another licence and got it to flash but i still have vin #00000000000 and when i go to scan it says 0000000 for the vin also,
It will read the pcm, still says 000000000 vin, so i tried a full reflash and then reread pcm still says 000000000 and everytime i reflash i have to do a crank relearn, thanks jason

Do you mean the VIN is 00000000000000000 or do you mean the PCM serial number is 000000000000?

If it is the VIN, you can easily reprogram the VIN using the Scan Tool.

If it is the serial number, then (using the latest V7.4.2) you need to do a full flash to allow EFILive to generate a new serial number. Once that is done, you will need to re-license the PCM the next time you flash. Then send me (paul@efilive.com) a screen shot of the license slots used/available. So that I can issue a replacement license for the extra one you will need to use. You can display that screen using tuning tool menu option help->FlashSCan V2 VIN licensing (or Help->FlashScan V1 PCM licensing).

Regards
Paul

lsxtech
May 23rd, 2007, 10:28 PM
the vin says 00000000000 i tried to reflash a vin like 6 times with no luck, thanks jason

lsxtech
May 23rd, 2007, 10:38 PM
I just put the vin# in the scan tool and the reread pcm when it was reading on the screen it showed vin but once it was done it showed 0000000 as the vin on cal screen. thanks jason

joecar
May 24th, 2007, 01:28 AM
When you used the scantool to write the VIN, did you get any errors on the F12 Console tab...?

lsxtech
May 24th, 2007, 02:09 AM
no error codes,car is running like crap also

joecar
May 24th, 2007, 03:37 AM
Sounds like it's only partly programmed...

lsxtech
May 24th, 2007, 07:35 AM
ok i tried to reflash original os to pcm and it will flash,but i don't know why it still says 000000000000 on the vin, if i program the vin in scan and then read pcm it shows the vin while it is reading, but once done and you open the tune it has vin#0000000 again and then go to scan and it says vin#000000000000, I think when it is flashing it is missing a file or something,because i have to crank relearn after every flash, I just ordered another computer from the scrap yard, maybe its the pcm, thanks jason