PDA

View Full Version : 2 BAR MAP pigtails...



SS2win
May 17th, 2005, 05:11 AM
if this post is inappropriate then just delete it with my apologies...

I'm planning on ordering parts to make a harness to connect my 2bar sensor without cutting the factory wiring.. The company I'll be ordering from is waytekwire and they have minimums that will force me to purchase more than I need. Would anyone be interested in purchasing a ready made harness adapter or parts to make your own? I'm not looking to make any money here just cover my expenses...

OR is there any ready made harnesses out there? If so I haven't found em...

QUICKSILVER2002
May 17th, 2005, 05:32 AM
I’ve heard that Speed Inc sells an adapter.

If not, I might be interested in one.

ForcedC5
May 17th, 2005, 08:11 AM
Pin-outs of the existing plug should be good enough to put these together fairly painlessly. What pricing are you able to get these for? If it's not too bad count me in for at least a couple..

SS2win
May 17th, 2005, 08:17 AM
looks like they will be about $7 each for a harness that connects weatherpack to metripack 150... that includes wiring with the proper colors (green, black, gray)..

ForcedC5
May 17th, 2005, 09:17 AM
looks like they will be about $7 each for a harness that connects weatherpack to metripack 150... that includes wiring with the proper colors (green, black, gray)..

Just sent you a PM.. put me in for 2

VortechC5
May 17th, 2005, 11:44 AM
Count me in!

Waytek is a good outfit to deal with. I've ordered from them before.

Blacky
May 17th, 2005, 12:47 PM
if this post is inappropriate then just delete it with my apologies...
This type of post is fine - that's what our forum is for :)
Paul

04BlueSS
May 17th, 2005, 03:27 PM
looks like they will be about $7 each for a harness that connects weatherpack to metripack 150... that includes wiring with the proper colors (green, black, gray)..

PM sent, count me in for 2 as well.

Highlander
May 17th, 2005, 03:40 PM
Try this

get the map sensor and take some thin nose pliers and see if you can remove the inner portion.... that is what i did with mine.

plugged right in...

you can remove the connector and install it with the right tools... no cutting required.

SS2win
May 17th, 2005, 11:33 PM
what sensor did you use?

PSWired
May 18th, 2005, 12:51 PM
Another satisfied Waytek customer here- their products were a big help to get my 6L conversion in my 95 truck done.

SS2win
May 19th, 2005, 01:55 PM
OK folks apparently there is a plug and play MAP sensor. 12580698 is the pn.. Dont think I will be doing the harnesses if this works...