PDA

View Full Version : 160* Thermostat



black98z
May 28th, 2007, 12:46 PM
I know this will sound like a dumb question and I apologize in advance but I just changed the thermostat in my Z to a 160* from the stock...now should I be doing any changes to the PCM to adjust for this change. I have a 98Z M6, and did do some digging in the tuning file but could not find anything obvious.

Thanks in advance,

Steve

macca_779
May 30th, 2007, 02:50 AM
I did this mod a while ago and the things that come to mind that you should change are;

Fan 1 Temp. On 83C off 81C
Fan 2 Temp. Up to you but I run On 85C Off 83C
Idle learn. Drop to 70C
There are also a lot of other Fuel/ECT settings that you should have a look at. If you look at what most settings are commanding at 90C then bring them down to 80C you'll be pretty right as a general rule.

black98z
May 30th, 2007, 04:34 AM
Thnx macca_779,
I did change the Fan 1 and 2 temp initially but did not think of the Fuel/ECT tables and will look at those as well as the Idle learn. Appreciate the help...