Which PID's for power PID's to work

[ViolatorTA]

As it asks. Which PID's need to be selected for the different power PID's to work. ie: HP to wheels, engine tq, ect..

[lsxtech]

go to calculated pids and you can get power at wheels
power_rw

[lsxtech]

or click on performance and they are there
system= performance to get pids

[ViolatorTA]

I Understand where to get the PID I am just not sure which corrosponding ones I need to get them to work properly on the dashboard.

[lsxtech]

does yours have an x across the pid

[ViolatorTA]

No but if I right click on certain power PID's the the info tab isn't highlighted and others I get an error.
example.

http://img.photobucket.com/albums/v696/Violatorno1/PWrearwheels.jpg

[lsxtech]

click on delivered engine torque and then power at flywheel will work ,

[ViolatorTA]

Ok..got that. Do you see where the box on the link above states

PID Value cannot be determined because
the following error would occur:
Divide by zero.


That doesn't allow any reading when I log. It always reads zero for HP at wheels

[ViolatorTA]

Just found it. Have to select Wheel acceleration/deceleration PID to make it valid. Thanks for helping out.

[lsxtech]

yeah i seen that i don't think it can calculate at wheels without having something else, like maybe four chanel abs or something, not sure on that one

[purrvert]

You may need to enter the vehicle weight. Same box the vin and operating system get entered.

[lsxtech]

now that you said that seems i remember reading that