PDA

View Full Version : 03 Impala V6 3800


06-6.0 SierraHD
June 6th, 2007, 01:40 PM
To read the ecm on a 03 Impala with the 3800 non/sc which one do i choose.
Gen III? having problems reading it.
GMPX
June 6th, 2007, 09:30 PM
You can't we were going to add support for them but between the E38/E67 and some other projects this has been pushed back, sorry.

Cheers,
Ross
06-6.0 SierraHD
June 7th, 2007, 02:10 PM
thanks for reply. just wondering why it wouldnt workcouldnt figure it out.Thanks
N0DIH
September 20th, 2008, 05:29 PM
Any timeline on the 3800 support?
playtoy_18
February 11th, 2009, 09:47 AM
Curious about the 3800 support also,i've got the file for tunercat but wouldn't mind having an efilive version of it also.
N0DIH
February 11th, 2009, 10:15 AM
With Roadrunner support....
playtoy_18
February 12th, 2009, 10:53 AM
I can get my wifes '04 to read using the LS1 option-haven't logged anything yet or even played with pids etc.. but it connected with the Gen III LS1 option.
I am tuning via TCII-datalogging with A-tap(which does NOT have a dyn/air pid.)
GMPX
February 12th, 2009, 04:25 PM
The scantool will work fine on the 3800 V6 PCM, don't get that confused with 'Reading' the PCM, as in to tune it.

Cheers,
Ross
N0DIH
February 13th, 2009, 03:56 AM
Agreed, I have used EFILive for scanning for some time now, it works very well.
playtoy_18
February 14th, 2009, 12:53 AM
Sorry,by reading I meant scanning-not reading the calibration.
sorry for the misprint GMPX.

If your interested in ever offering support for these or Ford vehicles let me know.
I do some side stuff for various used lots and they allow me to download PCM's when needed.
I'm also a Ford technician and can download plenty of their calibrations also.