Installing the 2 Bar MAP Sensor tonight... Advice???

[nonnieselman]

Hey guys,
Ill be installing my 2 Bar MAP Sensor tonight, and prob start on the tuning...

Just one question...
My OS right now is 09381344
How in the world do i go to COS3 when this number isnt close to any of my choices??

This PCM came from Wait4me, The OS is 12205612 on that tune when i recieved it... 2002 PCM...


HELP... what do i do??
Ive read the Tutorial on EFI Live... but it seems kindof Bland...

Help again.. haha

Thanks guys!!!!

[joecar]

Open 2 instances of the tune tool, one on 09381344, the other on 12212156;
then copy all the tables from 09381344 to 12212156, table-by-table (somewhat tedious, takes about 1-2 hours);
any missing tables or transposed tables will have to be dealt with somehow (post up here);
when done, do a full flash of 12212156 (and then read it back into a new file and compare).

12212156 is the stepping stone to COS3/COS5.

[nonnieselman]

Open 2 instances of the tune tool, one on 09381344, the other on 12212156;
then copy all the tables from 09381344 to 12212156, table-by-table (somewhat tedious, takes about 1-2 hours);
any missing tables or transposed tables will have to be dealt with somehow (post up here);
when done, do a full flash of 12212156 (and then read it back into a new file and compare).

12212156 is the stepping stone to COS3/COS5.



I dont have a 12212156..... did you mean what i posted up first...... 12205612???

Im confused.... i looked in my Custom OS Folder and that 12212156 aint in there.

[nonnieselman]

I PMed Ross ( GMPX ). Im waitin on his reply.

[joecar]

This chart is fron the COS tutorial:
http://img503.imageshack.us/img503/7528/osni2.png

It shows the GM OS id's and their corresponding COS id's.

12205612 is not listed in that chart, so you will have to first convert to one that is listed
(e.g. 12212156); this will make it easy to transition to the COS listed.

12212156 has the advantage of giving you a choice of COS3 (02020003) or COS5 (02020005).

12212156 is a GM OS, not a COS, so you won't find it your custom OS folder;
you can find it at www.holdencrazy.com (thanks Tordne).

:)

[nonnieselman]

Ok im still tryin to figure this out....
I found a 2002 Silverado LM7 Automatic with OS of 12212156 on Holdencrazy,com.
I just downloaded it. (Thanks Tordne!!! )

So now, Do i just copy my info from my Current Tune to this one i just Downloaded, and flash it to my PCM. Then change it to the COS?

[joecar]

Yes, copy each table from your current tune to your new 12212156
(copy table-by-table using copy-with-labels and paste-with-labels;
resolve any tables that are transposed, missing, or extra).
Then full-flash your new 12212156 into your PCM.
Read it back and save it into a file.
Make sure your car runs (it should run as good as it did before this).
Take some logs and verify that it runs good.

Then full-flash COS3 or COS5, then cal-flash from your saved 12212156.

[nonnieselman]

Make sure your car runs
Its a truck......

HAHA.. jk man.. i appreciate your help!!
Fixin to start on the copying of the tune..
Thanks again man!!!
Jonathan

[joecar]

lol... everything is a car or truck depending on your view... :D

[nonnieselman]

lol... everything is a car or truck depending on your view... :D

True!
Well i finally got through copying the tune... only took 2 hours!!!!
Fixin to go try it...


Here are the tables that were missing.. So i left them alone..

B3643
B3644
B3645
B3652
B3653
B3654
B3655
B3656
B3657
B3658

B3641
B3659

Lean Cruis:
B3634
B3635
B3636
B3638
B3639

B3646



These were missing...

B3602
B3804




What should i do????

[joecar]

B3643
B3644
B3645
B3652
B3653
B3654
B3655
B3656
B3657
B3658

B3641
B3659

Lean Cruis:
B3634
B3635
B3636
B3638
B3639

B3646
Those are only in your new file; leave them as is.



B3602
B3804
Those are only in your old file, nothing you can do... I can't find descriptions of them, what were they...?

...

You then do a full flash...
Then, read back the flash and save it in a file;
compare the pre-flash and post-flash files (open the pre file, then open the post file as alternate, and display differences;
make sure that the differences are very small or non-existent.

Start up and make sure it runs... it should run as good as it did previously; take some logs to verify.

[nonnieselman]

B3602 Commanded Fuel When In Cat Protection Mode ( no cats on my truck) Just wondering....

B3804 Minimum MAP To Enable LTFT...


Just got back from a test drive.... i got alot of learning to do....!

Attached are my Current Tune and Latest Log