PDA

View Full Version : Need Help just installed my WB02



Spdfrk1990
June 16th, 2007, 11:07 AM
I have a NGK WB I got everything installed and it seems to be working fine except the Base efficiency PID has a X through it??? The AFR will show up fine and seems to be working though. Here is the text File I took out the D in "{CALC.AFRNGKDAD1.AFR}/{GM.AFR}" and it still did not work im stumped and I really want to start tuning!

mr.prick
June 16th, 2007, 11:49 AM
did you select the external analog voltage pid?

Spdfrk1990
June 16th, 2007, 11:52 AM
Yup this is drivin be crazy cause it is the only hold up.

Spdfrk1990
June 16th, 2007, 11:54 AM
Here are the pids.
Here is the error I get under more information.

Base Efficiency Numerator 1 - NGK {CALC.BENNGKAD1}

Expression:
factor = {CALC.AFRNGKDAD1.AFR}/{GM.AFR}
is NOT valid because:
Unknown parameter {CALC.AFRNGKDAD1.AFR}, at position 22.

PID value cannot be determined because
the following error would occur:
Expression not valid: Unknown parameter {CALC.AFRNGKDAD1.AFR}, at position 22.

Spdfrk1990
June 16th, 2007, 12:00 PM
Yesssssss I fixed it!
Changed {CALC.AFRNGKDAD1.AFR} to {CALC.AFRNGKPLXAD1.AFR}