PDA

View Full Version : Noob RR question


esco35m
June 17th, 2007, 10:46 AM
I have purchased Flash Scan V1 and RR. Do I have to flash my car PCM then install RR, or can I just install RR right out of the box? I am very new to this but ready and willing to learn. Thank you in advance. :help2:
ChipsByAl
June 17th, 2007, 11:55 AM
If you haven't read your stock PCM, that is all you need that PCM for. First connect to the RoadRunner out of the vehicle and load it with the complete file. You can then experiment with it before installing the unit.
Al
esco35m
June 17th, 2007, 02:48 PM
Thanks Al. So copy all the stock pcm to the RR. Is this correct.
mr.prick
June 17th, 2007, 02:59 PM
yes,
and do your self a favor and make more than one copy of your tune
esco35m
June 17th, 2007, 03:02 PM
yes,
and do your self a favor and make more than one copy of your tune
Thanks for the advise, will do.