PDA

View Full Version : 160 degree t-stat



Spdfrk1990
June 18th, 2007, 12:59 PM
Besides changing the fan temps and doing the auto VE again anything else I need to change? I just ordered 1 today with a 80MM TB.

vatman02
June 18th, 2007, 01:31 PM
you may end up with some idle issues hunting surging ive seen them learn out or you could tune then out

SSpdDmon
June 18th, 2007, 03:44 PM
Idle learn temp should be dropped....check the tutorial section (has my idle sticky) for details.

Spdfrk1990
June 18th, 2007, 03:57 PM
Thanks man.

SSpdDmon
June 18th, 2007, 11:40 PM
Thanks man.
Sorry, I just looked and it wasn't there anymore. I don't remember editing it out. Anyway, under Idle>Learning>Parameters, the first cell (IIRC) is the temp at which it'll start 'learning' the idle requirements. If you run on a cold day, you might never get past the 178*F factory setting. I set mine at 160*F.

Spdfrk1990
June 19th, 2007, 03:44 AM
B4501(min) is set to 176 and B4502(max) and set to 234. Think I should lower both by 20 deg to 156 and 214?

SSpdDmon
June 19th, 2007, 03:51 AM
Just drop the first one...20 degress is fine.

Spdfrk1990
June 19th, 2007, 04:00 AM
Ok thanks