160 degree t-stat

[Spdfrk1990]

Besides changing the fan temps and doing the auto VE again anything else I need to change? I just ordered 1 today with a 80MM TB.

[vatman02]

you may end up with some idle issues hunting surging ive seen them learn out or you could tune then out

[SSpdDmon]

Idle learn temp should be dropped....check the tutorial section (has my idle sticky) for details.

[Spdfrk1990]

Thanks man.

[SSpdDmon]

Thanks man.
Sorry, I just looked and it wasn't there anymore. I don't remember editing it out. Anyway, under Idle>Learning>Parameters, the first cell (IIRC) is the temp at which it'll start 'learning' the idle requirements. If you run on a cold day, you might never get past the 178*F factory setting. I set mine at 160*F.

[Spdfrk1990]

B4501(min) is set to 176 and B4502(max) and set to 234. Think I should lower both by 20 deg to 156 and 214?

[SSpdDmon]

Just drop the first one...20 degress is fine.

[Spdfrk1990]

Ok thanks