Get ready Howard...Beer is coming to town!

[Beer99C5]

Hope you got some boards...its gonna suck taking it off the trailer!

On the way to Redline Motorsports Tuesday for a little tweaking :D

http://www.retrorelics.net/jim/Boards/Corvette/July07a.JPG

http://www.retrorelics.net/jim/Boards/Corvette/July07b.JPG

http://www.retrorelics.net/jim/Boards/Corvette/July07c.JPG

[TAQuickness]

Whatcha havin done Jimmy?

[Beer99C5]

Stage two Patriot heads, UD Pulley, and a lil cam :hihi:
Then some fine tuning of the COS 5

I swapped the racetronics fuel pump that I been having trouble with with a replacement racetronics today, did not get a chance to log the FP though, hopefully that issue is gone.

[ScarabEpic22]

Im a truck man, so nice Avy!

But, your blue Vette just looks so sick...


Is your Avy tuned as well?

[joecar]

I see you made a point of getting the "Happy Hour" sign in the 2nd photo... :cheers:

[Beer99C5]

I see you made a point of getting the "Happy Hour" sign in the 2nd photo... :cheers:

LOL yes I did, that is my Loft, I hang out there more than in the house, Have my Engraver in there, a fridge and a couple machines networked for internet gaming.


Im a truck man, so nice Avy!
But, your blue Vette just looks so sick...
Is your Avy tuned as well?

Not yet Scarab, but I am probably gonna ask for a LM-1 for X-mas to tune it, I have DL the factory tune and snooped around it. The Vette and Nitrous has consumed my time the last year and a half, Howard will finish the vette and I can move on to a new project.

[Beer99C5]

Howard got a baseline, looks like the new Racetronics is better than the other racetronics...
99 C-5 A-4 LS1, American Racing LT Headers (Cats and X-pipe), Shaner Ported TB, LS6 intake, 42# Delphis, Borla Cat Backs, Blackwing CAI, and tuning by me with a lil help of you guys on this board :)

Gain of 40 HP with American Racing LT Headers (Cats and X-pipe), Shaner Ported TB, LS6 intake, 42# Delphis from my origional dyno of 300 RWHP (from another shop long ago).


Here is my pre H/C Baseline.

http://www.retrorelics.net/jim/Boards/Corvette/DynoJuly07baseline.jpg


The AVY got 13 MPG towing the trailer and Vette, and 21 coming back with no trailer.

[ScarabEpic22]

Nice man!

Ohh, and Im serious about the Avy, even just play with the trans settings a little and remove TM from the engine and trans and it will feel completely different and much lighter on its toes (hard to imagine for a ~6000lbs truck). My TB (~4600lbs, albeit with a much smaller engine) felt like it was doing windsprints except all the time once I loaded the tune with just trans tweaks.

[Redline Motorsports]

Cars idling and sounds nice!

Hope to get er' on the dyno again Saturday!

HT

[johnsZ06]

What are the specs on the "little" cam?

[Beer99C5]

:D

Cam Specs are 224/228 on a 114 .58X lift



http://www.retrorelics.net/jim/Boards/Corvette/DynoH_C.jpg

http://www.retrorelics.net/jim/Boards/Corvette/RedlineTBplate.JPG

Spray numbers later in the week...I left Howard an empty bottle :bash:

[TAQuickness]

That baby cam sure woke things up! Great work

:D
Spray numbers later in the week...I left Howard an empty bottle

Major party foul :cucumber::moon1: :banana:

[Redline Motorsports]

:D

Cam Specs are 224/228 on a 114 .58X lift



http://www.retrorelics.net/jim/Boards/Corvette/DynoH_C.jpg

http://www.retrorelics.net/jim/Boards/Corvette/RedlineTBplate.JPG

Spray numbers later in the week...I left Howard an empty bottle :bash:

What do you have the laser cutting tool in the kitchen??/

Car woke up nice. A set of 3.42's and a 2800 rpm converter and this thing will rock!

I'll get the EMPTY LOL! bottle filled on Monday!

Howard

[Beer99C5]

Here is some spray dyno's
50 shot Dry on about 3000 RPM
50 shot wet on around 4000 RPM

http://www.retrorelics.net/jim/Boards/Corvette/DynoHCNitrous.jpg

The Dry wet hit will be combined are going to be for the next dyno and then its a wrap.

Once I have the Combined spray number and the car back I am gonna laser engrave the Breather w/ the C-5 logo and the spray numbers :notacrook: