jannes_z-28
August 1st, 2007, 04:12 AM
I have a 69 Camaro with an LS1/T56 from a 2001 Camaro in it. I have now a problem were I can not connect to the PCM. Efi Live says that it cannot connect to the PCM and try to turn off ignition and so on.
I have tried with another scandevice to se if anything is wrong with my cable or Flashscan and it didn't work either.
So how can I go forward in my search for faults. The pins 2 & 16 on the connector has voltage when ignition is on. Pin 16 has voltage when ignition is off as expected.
The connectors Pin 2 is connected to the C230 plug pin K.
Since I have voltage on Pin2 doesn't that mean I have signal?
I should also say that the engine is working and runs OK.
Any help is appreciated.
Thanks
Jan
I have tried with another scandevice to se if anything is wrong with my cable or Flashscan and it didn't work either.
So how can I go forward in my search for faults. The pins 2 & 16 on the connector has voltage when ignition is on. Pin 16 has voltage when ignition is off as expected.
The connectors Pin 2 is connected to the C230 plug pin K.
Since I have voltage on Pin2 doesn't that mean I have signal?
I should also say that the engine is working and runs OK.
Any help is appreciated.
Thanks
Jan