PDA

View Full Version : 2004 monaro/gto o2 harness connector



stigmundfreud
August 20th, 2007, 09:40 AM
Does anyone know the part number or a like for like replacement that is suitable for the narrrow band 02 sensor connector for an 04 year monaro/gto (5.7).

Unlike the newer cars with the square connector mine ahs the older flat four wire connector, much like on a PC's IDE power supply.

Everything is wired in but I just want to fabricate a nice clean extention loom and rather than pay $100 dollars for a kit here in the uk I'd like to fabricate one!

I do actually have a spare connector from the old sensor but I cannot get the pins out - which leads to my 2nd question.... how can I get the pins out so I can fabricate my new loom with the spare connector?!

joecar
August 20th, 2007, 06:27 PM
If it's a Metri-Pack connector, you can pull out the pin terminals using this pick tool:
http://www.ledfoote.com/osc/product_info.php?cPath=28&products_id=188&osCsid=382c6044870b3039b987dd60af0e056b

Ed@Late Model Speed
August 21st, 2007, 06:09 AM
a paper clip bent out and filed flat on one side works well too, you just have to "jiggle" it a lot


Ed

stigmundfreud
August 21st, 2007, 06:32 AM
cheers guys!