A little bummed about V2 EFI Live and Duramax

[chevyspy]

Just getting used to EFI Live and tuning/datalogging. From what I have discovered so far, one of the things that bothers me is that I am not able to log any transmission parameters while logging engine stuff. I am assuming this is becuase the truck has two seperate modules administering duties to each component.

When I load the ECM PID's , everything to monitor transmission is "x'ed" out. Is there a trick to do this? I would at least like to see what gear the truck is in while monitoring the engine PID's.

[Tordne]

This is a valid issue and is a current limitation in the V7 software. We intend to resolve this issue in the version 8 (V8) software release. I'm not sure if it is possible to implement this any sooner than that I'm afraid.

[chevyspy]

No problem, thanks for the update.

[turbo lcc]

Is V8 still scheduled for 2008 or will we see it sooner?

[Tordne]

Coming into September I'm going to say with some confidence that it will not be this year I'm afraid :bawl:

[JoshH]

Andrew, is v8 going to have standalone capabilities? Also, should be expect to see more tables for LBZ tuning when v8 is released or would that be coming later?

[Tordne]

Standalone capabilities are a V2 thing and are for the most part independent of the FlashScan software version. As far as I am aware standalone capability is expected well before V8.

Ross posed this (http://forum.efilive.com/showthread.php?t=6030) earlier which mentions a refresh of calibrations including the LBZ.

[JoshH]

Thanks for the info, Andrew.