emarkay
June 7th, 2005, 10:40 AM
Well, maybe not a dwell meter, but we are talking Rochester 4 bbl Quadrajet, HEI ignition, weights and vacuum advance, and um, no computer at all.
Bizarre car trouble......
I have a 1977 98 Regency with stock Olds 350 and stock M4MC Quadrajet, 77K miles. About every 4th or 5th time, car will start up fine, and idle at normal fast idle speed, AND THEN either a minute or so after starting OR after pulling out from stopped position, car will stall and die. Nothing can be done to get a restart - no closed throttle, pumped or floored. - EXCEPT BY "PRIMING" - see below!
This has been a problem for me for many months and is finally becomming "chronic".
Carb rebuilt, fuel filter replaced, fuel pump replaced, lines checked, no apparent leaks, new plugs and wires, new cap and rotor,new rubber hoses, engine strong (no smoke), car well maintained.
****Clue #1: No fuel found in accellerator pump upon immediate inspection of carb at time of stalling. (That is why I did all the above repairs.)
When I rebuilt the carb, I cleaned it and found little evedence of dirt and no evedence of prior rebuild. I replaced needle and seat, and tripple checked smooth operation and float level, and check ball, and all gaskets, and did not see any OBVIOUS evedence of any internal leaks (Main discharge tube plugs seem to be a problem?), and used specs found in 1977 Olds Shop Manual. One other suggestion is a dirty "sock" in the fuel tank, but that doesn't make sense being so intermittant.
One other possibility I have seen is the "Siphon break passages" (may not be applicable to this MY car) and also, the vacuum breaks APPEAR to hold vacuum and function with a gradual (2 sec or so) return when vacuum is released. All vacuum hoses have been replaced on carb, and all others EMISSION hoses (cannister, EGR, THERMAC, DTVS,) are plugged. Timing is about correct (advanced to slight pinging at WOT under load), plugs wires and cap/rotor are new. Weights were rusty but are free.
****Clue #2: If I pour raw gas down the primary (a desperation move the first time this happened) THE CAR WILL START!!!! AND RUN FINE FOREVER!! Ocasionally I need to ""prime"" it twice to get it to stay running.
This has been happening for months now (winter and summer) and there is no pattern to it except with a cold engine and to pour raw gas down carb to get it to run!
HELP!!!
MRK
PS: I originally thought the carb rebuild fixed it - is "seemed to" but I finally got stranded big time yesterday, and am now getting frustrated!
Bizarre car trouble......
I have a 1977 98 Regency with stock Olds 350 and stock M4MC Quadrajet, 77K miles. About every 4th or 5th time, car will start up fine, and idle at normal fast idle speed, AND THEN either a minute or so after starting OR after pulling out from stopped position, car will stall and die. Nothing can be done to get a restart - no closed throttle, pumped or floored. - EXCEPT BY "PRIMING" - see below!
This has been a problem for me for many months and is finally becomming "chronic".
Carb rebuilt, fuel filter replaced, fuel pump replaced, lines checked, no apparent leaks, new plugs and wires, new cap and rotor,new rubber hoses, engine strong (no smoke), car well maintained.
****Clue #1: No fuel found in accellerator pump upon immediate inspection of carb at time of stalling. (That is why I did all the above repairs.)
When I rebuilt the carb, I cleaned it and found little evedence of dirt and no evedence of prior rebuild. I replaced needle and seat, and tripple checked smooth operation and float level, and check ball, and all gaskets, and did not see any OBVIOUS evedence of any internal leaks (Main discharge tube plugs seem to be a problem?), and used specs found in 1977 Olds Shop Manual. One other suggestion is a dirty "sock" in the fuel tank, but that doesn't make sense being so intermittant.
One other possibility I have seen is the "Siphon break passages" (may not be applicable to this MY car) and also, the vacuum breaks APPEAR to hold vacuum and function with a gradual (2 sec or so) return when vacuum is released. All vacuum hoses have been replaced on carb, and all others EMISSION hoses (cannister, EGR, THERMAC, DTVS,) are plugged. Timing is about correct (advanced to slight pinging at WOT under load), plugs wires and cap/rotor are new. Weights were rusty but are free.
****Clue #2: If I pour raw gas down the primary (a desperation move the first time this happened) THE CAR WILL START!!!! AND RUN FINE FOREVER!! Ocasionally I need to ""prime"" it twice to get it to stay running.
This has been happening for months now (winter and summer) and there is no pattern to it except with a cold engine and to pour raw gas down carb to get it to run!
HELP!!!
MRK
PS: I originally thought the carb rebuild fixed it - is "seemed to" but I finally got stranded big time yesterday, and am now getting frustrated!