PDA

View Full Version : Need a ls6 bin file please.



slopokegtp
August 27th, 2007, 08:16 AM
Been working on my tune for 2 months now and still can not get the car right. vetuning is all over the place. I found out that the maf I bought for my vette was for a 6.0l truck so my maf table was WAY too lean. Fixed that and the difference in the knock sensors frequency from 02 ls1 to 04 ls6 and still have issues with audible knock. KR does not show up in scanning any more and I have ran 109 VPrace fuel and still audible. Could be from straight headers and a borla stinger exhaust but, I still get popping if I feather the gas to WOT. Stomp on it and PE kicks in 12.5 all day long and no KR. I have even loaded a stock LS1 timing table (which is much lower then the ls6) and still nothing just a loss in power.
Anyone have a stock ls6 tune with intake and headers they care to share? :notacrook:

gotabav
August 31st, 2007, 11:56 AM
Here is my 2005 CTS-V stock tune. I have done mods to this tune and uploaded it with no problems, but this is the un-modified stock tune. Hope this helps.

slopokegtp
August 31st, 2007, 01:04 PM
Thank you very much :notacrook:

slopokegtp
September 1st, 2007, 05:08 AM
document is coming across as a .php document?:help2:

SSpdDmon
September 1st, 2007, 05:58 AM
document is coming across as a .php document?:help2:
You have to change it...

Drop down the box below the file name and change it to All Files...

Then, rename the file as a .tun file. :)

slopokegtp
September 2nd, 2007, 12:34 AM
Thanks, that will work