onfire
August 30th, 2007, 07:24 AM
With A0008 set at 1.0 everywhere, my commanded AF at start is 11.1 : 1 After it idles for a few seconds it keeps leaning out until B3647 takes over.
I can manipulate it with A0008, but with A0008 set at 1.0, which table commands the 11.1:1 until B3647 takes over?
I can manipulate it with A0008, but with A0008 set at 1.0, which table commands the 11.1:1 until B3647 takes over?