PDA

View Full Version : COS5...which table controls the commanded AF <100F ECT at start?



onfire
August 30th, 2007, 07:24 AM
With A0008 set at 1.0 everywhere, my commanded AF at start is 11.1 : 1 After it idles for a few seconds it keeps leaning out until B3647 takes over.

I can manipulate it with A0008, but with A0008 set at 1.0, which table commands the 11.1:1 until B3647 takes over?

Chevy366
August 30th, 2007, 08:57 AM
See if this helps !
http://forum.efilive.com/showthread.php?t=4224&highlight=COS3+lean+start