PDA

View Full Version : DMA only for Dynamic Mode error...



McRat
September 12th, 2007, 11:13 AM
I've spent the last few days trying to do external data collection.

I finally get everything in place, all the sensors tested, then all I can get is a cryptic error telling me to set the software to Dynamic. It IS in dynamic.

It does not matter what PIDs I select, or whether I select PIDs at all. Same error no matter what. I can communicate with the truck, I just can't use the SCAN software at all.

This is with V2, latest public software/firmware, a LLY that has been flashed and logged hundreds of times. The computer I'm using is new, it's a Vista32 Sony notebook.

McRat
September 12th, 2007, 11:35 AM
"One of more _DMA PIDs are selected. This Duramax ECM can only scan _DMA PIDs in Dynamic or Stream scan mode. ..."

Does not matter if you have selected _DMAs or not.

V7.4.2 (Build 534) ... (Build 666)

I tried it with an XP computer and it did work though. But the software on the XP computer is 7.4.2 Build 515 / Build 644

Blacky
September 13th, 2007, 08:36 AM
I'm looking into it...
Paul