louis
September 14th, 2007, 02:59 AM
Hello everyone.
I am trying to follow my scan using the AFR_LM11 map (avg) and see where the timing is displaying. (Not sure yet why my ben map only shows 0.00 all the time but thats next issue)
When I look in the spark high and low octane tables all I see is at idle on 1.20 grams 0.7 at 800 rpms.
The problem I see is even when at 3000 4000 or any rpm I am only seeing timing in the last column 1.20 grams. It does not move to any other columns no matter what rpm.
What am I missing here?
I am trying to follow my scan using the AFR_LM11 map (avg) and see where the timing is displaying. (Not sure yet why my ben map only shows 0.00 all the time but thats next issue)
When I look in the spark high and low octane tables all I see is at idle on 1.20 grams 0.7 at 800 rpms.
The problem I see is even when at 3000 4000 or any rpm I am only seeing timing in the last column 1.20 grams. It does not move to any other columns no matter what rpm.
What am I missing here?