PDA

View Full Version : car wont start with COS#5



articSS
September 14th, 2007, 03:17 PM
i upgraded my 99 operating system to an 02 operating sytem and the car runs fine. i loaded the cos5 file and then loaded the calibration file from my 02 operating system and the car starts for 1 sec and dies, wont stay on by itself or while i try to make it idle it dies. i even loaded the 02 operating system with the cos5 calibration and it runs fine. Can some help me out?

Beer99C5
September 15th, 2007, 12:08 AM
i upgraded my 99 operating system to an 02 operating sytem and the car runs fine. i loaded the cos5 file and then loaded the calibration file from my 02 operating system and the car starts for 1 sec and dies, wont stay on by itself or while i try to make it idle it dies. i even loaded the 02 operating system with the cos5 calibration and it runs fine. Can some help me out?


Pull the plugs, bet you did what I did :cheers: I have a thread here on it.

http://forum.efilive.com/showthread.php?t=5190

Start around post #10

joecar
September 15th, 2007, 04:16 AM
As Beer says, you're too rich at idle, your B3647 shows AFR ~9 at idle (and also too lean at WOT).

articSS
September 19th, 2007, 11:43 AM
thanks i went back and followed the tutorial and it worked like a charm.