STS Truck Trubo Kit **$2400 shipped**

[kbracing96]

Hey Guys, I have the STS kit off my truck. It will come with the T60-1 turbo with a .81 A/R housing. This kit is setup for a X-cab, but will fit a reg cab by not using one of the charge pipes. This kit ran flawlessly on my truck for 2 1/2 years till I went front mount. It is not intercooled. Any questions, let me know.

http://i3.photobucket.com/albums/y57/Kbracing96/DSCF0014-3.jpg

[vatman02]

do you have the istallation instructions? does it have injectors? what kind of power were you making, at what psi? how high of a psi could i get out it? i have a 5.3 H.O. so it's all aluminium @ 9.5:1 compresion. i could likely go with 15#'s on pump gas

[kbracing96]

do you have the istallation instructions? does it have injectors? what kind of power were you making, at what psi? how high of a psi could i get out it? i have a 5.3 H.O. so it's all aluminium @ 9.5:1 compresion. i could likely go with 15#'s on pump gas

I don't have the instructions, I never got them when I bought it. It's not hard to put on and I can label everything for you. I'm not including injectors with it. I was close to 500 RWHP at 12#'s with my 4.8, but it had a small cam, was intercooled and meth injected. 15#'s would be pushing it, but with meth, it's probable possible.

I'm in Wheatland, WY about 3 hours north of Denver if that's close to you. If you like I can PM you my cell number.

[vatman02]

is this the complete kit or are there things i will need to buy to install it.

[kbracing96]

is this the complete kit or are there things i will need to buy to install it.

I bought all the couplers, clamps and pipes to make it a complete non intercooled kit since I used some of the original STS stuff on my intercooler and that's still on my truck. Some of the pipes are not the original STS stuff and are not coated, but they are Aluminized steel, so they shouldn't rust easily. You might need some odds and ends (maybe hardware), but its 99% complete.

[duramaximizer]

how did this kit spool. Would build boost throught the brakes?

[kbracing96]

It did sell, but as for spool, it did pretty well, and yes, I could build max boost (10psi) with brake stalling and I did cut a 1.76 60' time with it on a 4.8 in my 5500lbs truck.

[duramaximizer]

Sweet, sounds good. My friend had a 6.0 and we were just thinking. ;)