PDA

View Full Version : strange vin#



sweetdiesel
September 24th, 2007, 12:39 PM
I just bought a used 01 duramax/ally

when i try to connect to the truck it gives a message about the VIN#
and then says manufactuer Obdii paremeters have not been loaded:nixweiss:

i tried a couple different ways to enter the proper VIN# with no luck

when i connect to the truck it wont log properly?


i have not tried to read the ECM or flash it yet, should i ?

ive added 2 screenshots i hope you can see them

thanks

sweetdiesel
September 24th, 2007, 12:45 PM
here is the Vin# U=U3/4?HU"a"

And i also have the security light on the dash that will not go away?
im not sure if this is related

Trippin
September 24th, 2007, 03:03 PM
It may have a tune in it from another company. I have seen that before on a Westers tune.

sweetdiesel
September 24th, 2007, 03:37 PM
thanks guy
i have never heard or read about anyone haveing this before
but i was kinda thinking the same thing..the person whom i purchased the truck from said it wasnt tuned?

i can see what the op system is,So do you think i just try flashin a known stock tune in or try to read the tune?

LBZ
September 25th, 2007, 12:08 AM
I'd read then flash!

Trippin
September 25th, 2007, 03:56 PM
I agree, make a copy and then flash something new in.

If you need a copy of the stock tune for that truck, PM me the VIN # and I'll get you fixed up.

sweetdiesel
September 26th, 2007, 10:12 AM
well its LOCKED! looks like ill need a new ECM

here i thought i bought a virgin

v8vegaman
September 26th, 2007, 05:17 PM
I can see why people might lock a PCM but is there any kind of edicate or standard operating proceedure so that we don't lock these down and render them useless? What is the norm?:notacrook:

LBZ
September 26th, 2007, 05:56 PM
Well I guess it's off to the autowrecker for you !!

jimter
September 28th, 2007, 08:41 AM
You can send your ecm to wait4me or myself and we can unlock it.
His website is wait4meperformance.com or you can PM me and i can help you out.

sweetdiesel
September 29th, 2007, 01:33 AM
You can send your ecm to wait4me or myself and we can unlock it.
His website is wait4meperformance.com or you can PM me and i can help you out.


thanks :cheers:

ill do that for sure

GMPX
September 29th, 2007, 11:47 AM
TechII can also cause this issue, we have had a few customers who had a perfectly working ECM that after going to the dealer to be 'updated' comes back locked and VIN data wiped. Very common on 2001's

Cheers,
Ross

sweetdiesel
September 29th, 2007, 03:58 PM
TechII can also cause this issue, we have had a few customers who had a perfectly working ECM that after going to the dealer to be 'updated' comes back locked and VIN data wiped. Very common on 2001's

Cheers,
Ross

Ross
could very well be? the person whom i bought the truck from did mention he took the truck in for a service and ever since then there was a problom:nixweiss: security light always on? but runs fine?

So he never worried about it

im going through tuning withdrawal :bawl:

GMC-2002-Dmax
October 4th, 2007, 07:05 AM
[QUOTE=sweetdiesel]well its LOCKED! looks like ill need a new ECM



make sure the doors are all closed when trying to flash a 2001, I just had the same issue on one that I tuned, it would not even communicate withe ECM with the door on either side open.

:eek:

red12secz28
October 8th, 2007, 12:15 AM
I have the same issue that your are having. My pcm vin # is coming up with wierd digits when I scan the pcm. I have also been advised to send my pcm to wait4me to unlock the pcm by redoing the flash chip.

GMPX
October 8th, 2007, 11:56 AM
make sure the doors are all closed when trying to flash a 2001, I just had the same issue on one that I tuned, it would not even communicate withe ECM with the door on either side open.

:eek:

Really!, I thought all the comms woes were well and truley sorted :nixweiss:

Cheers,
Ross

sweetdiesel
October 19th, 2007, 07:04 PM
[QUOTE=sweetdiesel]well its LOCKED! looks like ill need a new ECM



make sure the doors are all closed when trying to flash a 2001, I just had the same issue on one that I tuned, it would not even communicate withe ECM with the door on either side open.

:eek:
Tony
thanks ill keep that in mind,but it is not my issue:frown:
it always has the security light on,ill be pulling the motor anyways so ill have time to ship off my ECM
thanks for everyones help on this:cheers: