Won't go into open loop at WOT, help please

[trymyz]

I am at my wits end, it seems as soon as I get something squared away something else pops up. Can somebody please look at my tune.

[Lextech]

I am a noob at this, so take this with a grain of salt. It looks like you are not getting into PE. Check under Mixture>Parameters>The temps are in Celcius
B3614 is set to 140C

[trymyz]

Thanks, Anybody got any other suggestions?

[wait4me]

It wont go into it because you are probably throwing MAF codes. You have shut off the maf in the tune. Yet you still have the codes being allowed to be on.

Also, you need to make sure your Main and backup ve tables match. Also the low octane table is being used for your main spark table right now also.

Fix the maf stuff and you will go back to normal.

[trymyz]

What codes, under what section? I thought I had them off. I will take a look again. Thanks. Wait4me, I also sent you an email awhile ago, about hitting some kind of fuel cut a 6400 rpm, any ideas?

[trymyz]

ttt...