PDA

View Full Version : Cant log ls2 e40



Jakes4321
September 29th, 2007, 01:25 PM
I cant get me scan tool to log a e40. It did generate a error report. Anyone have any ideas to fix this issue.

Blacky
September 30th, 2007, 10:25 AM
That error log shows no comms with the FlashScan unit at all. Maybe you just started the software and generated the error report. To be useful the error report needs to show some attempt at connecting to the vehicle.

Try clicking on the connect toolbar icon, then if/when it fails, generate the erorr report.

If you have tried clicking on the connect icon, what error message is displayed?

Regards
Paul

Jakes4321
September 30th, 2007, 01:08 PM
Ok, I will try that tomorrow and see how it goes.

The efilive scan tool works fine on my ls1 car and lq4 truck. Just not my ls2,
e40 ecm.

yellowC6ohio
October 29th, 2007, 04:52 AM
try selecting different PIDs. sometimes mine wont connect at all if a certain PID is selected, it took me forever to figure out thats what was causing the problem. unfortunately i can't remember exactly which ones they were.

Jakes4321
October 29th, 2007, 10:20 AM
Thanks....should have put resolved. Had a software bug