PDA

View Full Version : Can not flash due to license



Rusty
October 2nd, 2007, 04:12 AM
I have EFILive with FSP 1.2 datalogger/cable. I have programmed the PCM on my car many times. Recently, the tune software (V7.3.3 build 533) required me to couple my car to the cable again. I have only connected the cable to one car (same PCM and VIN). The PCM licensing shows two PCM 2EB3CT452316 and PCM 000000000000.

Current problem. The tune software will not flash the PCM until I license the cable to the PCM again. What am I doing wrong?:help2:

joecar
October 2nd, 2007, 05:32 AM
I pm'd Paul.

Blacky
October 2nd, 2007, 08:34 AM
See this thread for more info:
http://forum.efilive.com/showthread.php?t=4093

Send me an email at paul@efilive.com with the following information:
FlashScan serial number, auth code and a screen shot of the PCM licenses that have been used on your FlashScan cable.

See this thread for instructions on how to obtain that information:
http://forum.efilive.com/showthread.php?t=5790

Regards
Paul